PGI1 , 2 - Weights

Parts weights, so far so good:
revised PGI1 in 30/12/2011


     +------------------------------------------------------------+
     |                         Weights (g)                        |
     +----------------+----------+----------+----------+----------+
     | Item           |   PGI1   |   PGI2   |   PGI3   |   PGI4   |
     +----------------+----------+----------+----------+----------+
     | Fuselage (1)   |     15.5 |     17.9 |     16.9 |     17.5 |
     | Rear fuse(2)   |      4.2 |      7.1 |    ?     |    ?     |
     | Stab (3)       |      3.0 |      2.7 |      2.5 |    ?     |
     Wings (4)      |     27.5 |    ?     |    ?     |    ?     |
     FE (5)         |     19.2 |     18.1 |    ?     |    ?     |
     +----------------+----------+----------+----------+----------+
     | TOTAL          |     59.4 |    ?     |    ?     |    ?     |
     +----------------+----------+----------+----------+----------+

1 Fuselaje:
   PGI1 - Kevlar tube from Diego Sanchez, F.E. ring, CF wing pylon by Tio Farias, viscous timer, wire wing joiner, incidence ajusters, rear plug to boom, with rear pin. 
   PGI2 - Same as PGI1 but without timer, with rear pin. 
   PGI3 - Same as PGI1 but without timer, without rear pin.
   PGI4 - Balsa + Silkspan tube without timer, without rear pin.


2 Rear Fuse:
   PGI1 - just cone, connector and CF boom.
   PGI2 - CF tube (4,8g) + cone from Diego Sanchez (1,2g) + rudder without covering (1.1) , without DT lines, without estab mount
   PGI3 - not finished
   PGI4 - not finished

3 Stabs: 
   PGI1 - TresEnUno project RTF. 
   PGI2 - TresEnUno project without covering. 
   PGI3 - TresEnUno project without covering. 
   PGI4 - not finished, will be a TresEnUno model

4 Wing pannels: 
   PGI1 - Mediun size of TresEnUno model RTF.
   PGI2 - will be short size of TresEnUno model
   PGI3 - not finished, will be a TresEnUno model
   PGI4 - not finished, will be a TresEnUno model

5 F.E.s:
   PGI1 - RTF - Edgardo Figueroa´s F.E. with Tio Farias balsa + FG 4 copas blades (bigger).
   PGI2 - RTF - Edgardo Figueroa´s F.E. with Tio Farias balsa + FG 4 copas blades.
   PGI3 - not finished , uses FE EY4L (10g without ringes and blades)
   PGI4 - not finished , uses FE EY4L (10g without ringes and blades)

See detailed weight photos HERE

Nenhum comentário:

Postar um comentário